Frequently Asked Questions - www.centralparts.com
QDo you sell the shoe assembly for the Meyers Wingman Snow Plow.
A

Yes we do sell the Shoe Kit! If your plow has never had shoes you need to buy the kit that includes the Mounting brackets - Part Number 08092.

By Louis F on April 25, 2019. 
Was this review helpful to you? yes no
QWhat do the different types of poly edges refer to? I saw Type 1, type 2, Type 3, etc...
A

Type refers to "Durometer Rating and Chemicxal composition of the Urethane. Type 1 is used on Low Speed (20 mph) and slower equipment - Pickup Truck Plows - ATVS & UTVs. Type 2 is used on Municipal Trucks and applications with heavier plows under 40mph. Type 3 is high speeds use.

By Marcelo S on April 26, 2019. 
Was this review helpful to you? yes no
QWith this work for mvp vplow with new edge and backdrag edge
A

For the regular flat top MVP Ultra Mount there is not back drag edge option. For the cutting edge Part #28407AM you will need to order 2 of those along with 2 bolt bags Part #21610AM

By Justin S on July 26, 2019. 
Was this review helpful to you? yes no
Qfisher part number 28875 says fisher bolt bag. is this all the bolts required to install push plates for both sides or do i need 2 bags?
A

You will only need 1 bolt bag. It will come wiyh the following: 2 - 5/8-11 X 2 Hex Cap Screws 4 - 5/8 Hardened Flat Washer 2 - 5/8-11 Hex Locknut 4 - 1/2-13 X 1-3/4 Hex Cap Screws 14 - 1/2 Hardened Flat Washer 6 - 1/2-13 Hex Locknut

By joe c on July 30, 2019. 
Was this review helpful to you? yes no
Qfisher part number 28875 says fisher bolt bag. is this all the bolts required to install push plates for both sides or do i need 2 bags?
A

You will only need 1 bolt bag. It will come wiyh the following: 2 - 5/8-11 X 2 Hex Cap Screws 4 - 5/8 Hardened Flat Washer 2 - 5/8-11 Hex Locknut 4 - 1/2-13 X 1-3/4 Hex Cap Screws 14 - 1/2 Hardened Flat Washer 6 - 1/2-13 Hex Locknut

By joe c on July 30, 2019. 
Was this review helpful to you? yes no
QI have a western v blade ultramount. It is the kind you just pull up to the blade and it slides into the pockets. flip the lever over, set the pin and away I go. My question is, I have a 8 inch lift on my f250. Do you have drop down brackets to accommodate this? Even if it's for a 6 inch drop and I can use smaller tires for winter?
A

We do have the PDK5 in stock priced at $219.95 with free shipping. Using these bracket will help drop your plow down to the ground only about 5 inches. You can adjust your plow height as well.

By dan e on August 03, 2019. 
Was this review helpful to you? yes no
Qi.m looking for a INSTA LOCK DOUBLE-ACTING CYCLINDER 48847 ITS FOR A FISHER XTREME MINUTEMOUNT V2 PLOW
A

For the Xtreme V The Angle Cylinder is 44340 Double Acting 1-3/4 X 11 The Lift Cylinder is 56600K 1-1/2 X 10

By Marvin C on August 03, 2019. 
Was this review helpful to you? yes no
QCan you ship this to Ontario Canada?
A

Yes we can ship to Canada. There would be a shipping charge. Boarder patrol would contact you to pay duties and taxes.

By dan e on August 08, 2019. 
Was this review helpful to you? yes no
QDoes this unit come with hold down straps?
A

Yes they come with ratchet strap.

By MIKE B on August 12, 2019. 
Was this review helpful to you? yes no
QDoes this unit have central lube?
A

Can you please elaberate on your question? Are you referring to the bearings?

By MIKE B on August 12, 2019. 
Was this review helpful to you? yes no
QI need to reseal my Meyer E-47 power pack dose part number 15456am include everything all the seals I need to stop it from leaking? And dose the kit come with part # 15163am cup packing?
A

Yes the 15456AM is a Complete seal Kit for the E47 Series of Meyer Power Packs. It also includes the 15163am Cup as well as 1 quart of oil.

By Ron B on August 20, 2019. 
Was this review helpful to you? yes no
QFisher L series Part # in catalog 5523KAM need part number to order on line web site does not recognize the number
A

Only the OEM part #5523 is on our website.

By Ronnie B on August 22, 2019. 
Was this review helpful to you? yes no
QDoes this come with the truck mount?
A

Yes it does include the Mount - literally everything but the two quarts of oil to fill the Power Pack

By Troy H on August 27, 2019. 
Was this review helpful to you? yes no
QHow difficult is the mounting to the truuk
A

The best way to answer that is if you have basic skills with automotive tools - it is easy - just takes time. Drill some holes - tighten some bolts, etc.The electric is 98 % plug and play.

By Anne P on August 28, 2019. 
Was this review helpful to you? yes no
Qdoes snowdog plow come with all the mounting hardware for my truck or is that extra
A

Sorry fo rthe slow response - we have been swamped because of the threat of snow out west.To answer your question - yes our plows are complete with everything but the two quarts of oil to fill the power pack.

By mike h on August 30, 2019. 
Was this review helpful to you? yes no
QCould you put a SnowEx V blade on a tacoma
A

Your best bet is to talk to our sales representives for fit. They will need to know the Year & Model of your Tacoma. 1-800-761-1700

By Roy Z on September 04, 2019. 
Was this review helpful to you? yes no
Qis this for a set? Do you have a photo to compare to be sure these are correct?
A

I have attached an Illustraded Parts and Installation diagram for you to review. Mount kits are specific to the Year - Make and Model of vehicle so make sure this is the it based on your Y - M & M.

By Mitchell T on September 05, 2019. 
Was this review helpful to you? yes no
QI have an older spreader will this fit all Swenson's spreaders? , The part number I have is 04622-002-00
A

This Part Number is for a Swenson 18" Counter Clock Wise spinner disc. It has what is referred to as a Standard 4 Bolt predrilled base for the standard Swenson set ups.So yes it should bolt right up.

By Ron S on September 09, 2019. 
Was this review helpful to you? yes no
QI have an older spreader will this fit all Swenson's spreaders? , The part number I have is 04622-002-00
A

Yes - we have it in stock

By Ron S on September 09, 2019. 
Was this review helpful to you? yes no
QI have an older spreader will this fit all Swenson's spreaders? , The part number I have is 04622-002-00
A

In stock as we speak

By Ron S on September 09, 2019. 
Was this review helpful to you? yes no

SOCIAL MEDIA

NEWSLETTER SIGN-UP

SUBSCRIBE

ABOUT US

We are proud to be part of the solution for so many of our customer's needs in the snow plow industry. Central Parts Warehouse is a supplier of services and snow plow equipment. Our business strives in finding you the best suitable and high-quality products for commercial vehicle attachements and equipments. For more than 30 years, CPW has been working with America’s premier manufacturers and revolutionizing the way we deliver to our customers.

This years catalog features over 19 pages of just "V" Box or "Hopper" Salt Spreader parts for such names as Flink, Highway, Henderson, Swenson, Gledhill, Boss, Buyers, Fisher & Western to name a few.

Our customers are at the core of everything we do. At CPW, our whole team created our Core Values so we believe in them wholeheartedly. We are committed to living them purposefully and expect that you will notice it in all of your dealings with our employees.

SUPPORT

CONTACT US

  • Sales: (800) 761-1700
  • Other inquiries: (815) 469-1300
  • Fax: (815) 469-6958
  • E-Mail: [email protected]

HOURS

  • Monday-Thursday: 8:00am-4:30pm CST
  • Friday: 8:00am-4:00pm CST
  • Saturday: Only By Appointment
  • Sunday: Closed
mastercard
visa
american express
discover
Your Customer Reference #: 100-215-482-0
Switch to Desktop
Central Parts Warehouse - Snow Plow Parts For Less