Frequently Asked Questions - www.centralparts.com
Qwhat is the empty weight ?
A

Buyers shows that this product shipping weight is 212 lbs empty.

By Thomas D on February 13, 2024. 
Was this review helpful to you? yes no
QAre the 1.5 x 8 x 78 poly cutting edges blank, no holes?
A

Yes, the BNH at the end of the part number stands for blank no holes. You can purchase Type 1 with holes.

By on February 23, 2024. 
Was this review helpful to you? yes no
QWill a pv358 drag chain work on a 6 tooth drive spricket
A

You will need to know the pintle link on that particular drive chain. (I.E 662, 667H) If you have a sample of this chain you can send it in to us and we can determine if that will indeed work for you.

By William B on February 24, 2024. 
Was this review helpful to you? yes no
QDoes this come equipped with a vibrator?
A

That item is discontinued and replaced with 1470601SSE. This model does come with a 200lb vibrator. These are built to order so please call our sales office for lead time and availability.

By Tammy S on March 12, 2024. 
Was this review helpful to you? yes no
QDo you have push plates for a 2018 silverado 1500 with 3.5 inch lift with stock tires. The plow is a fisher mm ez v.
A

We will need more truck information in order get obtain the mount part number. You can run your vehicle on the Fisher match system or call our sales team @ 815-469-1300.

By Richard D on March 16, 2024. 
Was this review helpful to you? yes no
QI currently have a snow ex sp-2400 and would like to replace the salting unit only as I already have the wiring harness and the controller. Is this possible and how much?
A

Yes we can help you with ordering parts for this unit. Best suggestion is to call into our sales office and have our sales staff get you the correct part numbers pricing and availability.

By steve g on April 03, 2024. 
Was this review helpful to you? yes no
QHI, I will be needing a spreader chain for my Swenson Poly sander/salter. The problem is for the life of me I can NOT find a model number written on the unit!I went to Swenson online site and the one that "looks" like what I have is the PV series...polyhawk?? I need the Spreader Chain! it shows a 04043-071-00 1 .....BUT how can I be sure!????Thank U in advance for your time and help in this matter!
A

Please fill out the attached chain form and email into our sales office and we will be able to determine what you need from there. Please fill out completely and to the best of your ability.

By Doug S on April 12, 2024. 
Was this review helpful to you? yes no
Qis there a replacement bezel for this style of light
A

The only accessory for the ED3766 light is the EZ3766L Universal Bracket. Please call into our sales office for more information.

By tayler s on July 03, 2024. 
Was this review helpful to you? yes no
QWhat is the hub size for the VBS14017? I am needing a 14.5" spreader with 1" hub. or adapter to fit 1".Thank you,
A

Actual Measurement is 14.375" OD and 3/4" Bore Fin Side Hub 1.5" Tall 4 Full length Fins1.5" Tall C/W Rotation (Fins 3/8" Thick) 0.26" Dian Cross Drilled hole 3/4" from top of disc to center of cross drill Hub is 1.5" OD Base is 7/16" Thick

By Robert S on July 25, 2024. 
Was this review helpful to you? yes no
QGood day is this Buyers 3049810 the new updated controller for SHPE2000 controller that keeps going bad?
A

The newest P/N to replace your controller is: 3057918

By Richord W on August 28, 2024. 
Was this review helpful to you? yes no
Qplease verify part number 16221544 skin for the wings comes with the hardware
A

Sorry - Hardware is not included with just the skin

By Lee N on September 09, 2024. 
Was this review helpful to you? yes no
QI have a minute mount plow that is a 2008 Doge Ram 1500 and the plow number is serial number is 27775 . I want to know if this snow shoe kit, 83845AM, will fit this plow.
A

Per the Parts Diagram from Fisher for th SD Series 27775 Moldboard the shoe kit you need for this plow is Part # 27880. Please call our sales office for availability.

By Jill L on September 24, 2024. 
Was this review helpful to you? yes no
QCan I get dimensions of 0003-1-133 or can you tell me if it's 3" bore X 10" stroke?Thank You,Dennis
A

Cylinder is a sglcting 2.5" bore1" Pin Eyes on 18.0" CentersRod is 2.5" in Diameter BUT the ROD end is Milled Flat to 1.5" in WidthIt is a 10.0" Stroke

By DENNIS W on September 26, 2024. 
Was this review helpful to you? yes no
QIs this Meyer Kit (8170) a full kit for the Vplow? If so Is the price correct and is it in stock?
A

We do currently have this in stock and it is the complete set. Please call the sales office ext 319 as we have a great sales price for you that we cannot advertise online due to MAP pricing.

By Keith W on October 01, 2024. 
Was this review helpful to you? yes no
QWill the V Plow fit on a Can Am Defender H10?
A

You can either call our sales office or go to the website Snowexproducts.com and run your UTV throught the match system to determine if it is a fit.

By David M on October 14, 2024. 
Was this review helpful to you? yes no
QIs this aftermarket hi-way part a byers product?
A

This is not a Buyers product bearing.

By Christopher C on October 20, 2024. 
Was this review helpful to you? yes no
QI want to order snow ex wing kit and want to know if left side and right side come together
A

Yes this kit comes with both side wings, mounting brackets, cutting edges and hardware. Please see attachment for detailed photo.

By ali k on October 30, 2024. 
Was this review helpful to you? yes no
QWhich unit would be best for a church? Mainly will be used on sidewalks. We don't want a walk behind. We will have a 2" receiver on back of a large John Deere mower or use on back of a 3/4 ton pick up if needed in parking lot. Mostly used on sidewalks.
A

This is a great option for what you may use it for. We suggest calling into our sales office to discuss themany options and sales that may work best for you.

By Verle S on November 09, 2024. 
Was this review helpful to you? yes no
QNeed a quote On a conveyor chain for a Curtis Fast Cast 550 Series sand / salt spreader include a ploy spinner for same model . Please include prices , time frame order to delivery & shipping .
A

Please call our sales office as we need specific information when it comes to chains.

By Fred C on November 14, 2024. 
Was this review helpful to you? yes no
Qneeding a snow deflector for a 76974
A

You will need to call our sales office to let us know which model deflector you would like. They offer 3 different types for this plow. The poly and a 10" and 18 " rubber.

By randal g on November 19, 2024. 
Was this review helpful to you? yes no

SOCIAL MEDIA

NEWSLETTER SIGN-UP

SUBSCRIBE

ABOUT US

We are proud to be part of the solution for so many of our customer's needs in the snow plow industry. Central Parts Warehouse is a supplier of services and snow plow equipment. Our business strives in finding you the best suitable and high-quality products for commercial vehicle attachements and equipments. For more than 30 years, CPW has been working with America’s premier manufacturers and revolutionizing the way we deliver to our customers.

This years catalog features over 19 pages of just "V" Box or "Hopper" Salt Spreader parts for such names as Flink, Highway, Henderson, Swenson, Gledhill, Boss, Buyers, Fisher & Western to name a few.

Our customers are at the core of everything we do. At CPW, our whole team created our Core Values so we believe in them wholeheartedly. We are committed to living them purposefully and expect that you will notice it in all of your dealings with our employees.

SUPPORT

CONTACT US

  • Sales: (800) 761-1700
  • Other inquiries: (815) 469-1300
  • Fax: (815) 469-6958
  • E-Mail: [email protected]

HOURS

  • Monday-Thursday: 8:00am-4:30pm CST
  • Friday: 8:00am-4:00pm CST
  • Saturday: Only By Appointment
  • Sunday: Closed
mastercard
visa
american express
discover
Your Customer Reference #: 100-977-202-6
Switch to Desktop
Central Parts Warehouse - Snow Plow Parts For Less